Why Do Threads Strip in Thin Metal Parts?

Nov 09, 2026 Leave a message

METAL STAMPING INSIGHT

Why Do Threads Strip in Thin Metal Parts?

Learn why thin metal threads can fail and how different fastening methods help create more reliable connections.

 

Have you ever tightened a screw only to find that it keeps spinning without holding firmly?

This can happen when a threaded hole is made in thin sheet metal. Unlike thick metal blocks, thin sheets provide limited space for screw threads to grip.

This issue is common in metal brackets, electrical enclosures, equipment housings, and other stamped components. Let's look at why it happens and explore some common ways to improve threaded connections.

bracketwoodtopcentered

1. Why Do Thin Metal Threads Strip?

When a screw is tightened, its threads need enough contact with the surrounding material to hold securely.

In thin sheet metal, a tapped hole may only have a small number of threads. If the screw is tightened too much or the connection carries repeated loads, the threads can become damaged.

Once the threads are stripped, the screw may turn freely and lose its holding strength.

For this reason, direct tapping is not always the best choice for thin metal parts. The material thickness, screw size, and actual application should all be considered.

2. How Can a Raised Hole Provide More Thread Space?

One common solution is an extruded hole, also known as a flanged hole or tapped collar.

Instead of simply making a hole in the flat sheet, the surrounding metal is formed upward or downward to create a raised cylindrical section.

This raised area provides more material for tapping threads, allowing the screw to engage over a longer distance.

The suitable hole shape and height depend on the sheet thickness, material, and screw requirements. These details should be considered during product and tooling design.

3. When Should You Use a Clinch Nut?

For some applications, a raised tapped hole may not provide enough holding strength. In these cases, a separate fastener may be a better option.

A self-clinching nut is pressed into a prepared hole in the sheet metal. Once installed correctly, it becomes mechanically secured to the sheet and provides an internal thread for fastening.

Another option is a weld nut, which is attached to the metal part through welding.

Both methods are commonly used in sheet metal assemblies. The right choice depends on the required strength, available installation space, production method, and whether future removal is needed.

4. What Should You Check Before Ordering?

If your custom metal part includes threaded holes, it is helpful to confirm the following details before production:

  • Thread size and specification, such as M3, M4, or M5
  • Sheet metal material and thickness
  • Required screw tightening and fastening conditions
  • Whether direct tapping, an extruded hole, or a separate fastener is preferred
  • Hole positions and surrounding space for assembly
  • Surface treatment and coating requirements

A clear technical drawing helps the manufacturer understand the fastening requirements and evaluate a suitable production approach.

If you do not have a complete drawing, a physical sample or clear photographs with basic measurements can also help start the discussion.

Final Thoughts

Thin metal parts need careful consideration when threaded connections are required. Direct tapping, extruded holes, and clinch fasteners each have their own advantages.

Choosing a suitable fastening method early in the design process can help reduce assembly problems and improve connection reliability.