Split Bushing
SHANGERS / CUSTOM METAL COMPONENTS
Split Metal Bushings. Built Around Your Assembly.
Custom open-seam metal bushings and sleeves made to your drawings or samples. Specify the fit, length, wall thickness and seam profile; we review the material, forming and finishing requirements for your application.
100+ In-Stock Models / Free Samples / Custom Manufacturing to Your Drawings
01 / THE PRODUCT FAMILY
A Clear View of the Metal. A Defined Fit for the Assembly.

Product range shown for reference. Final dimensions, material and finish follow the agreed drawing.
SEAM
Open-Seam Construction
The seam profile is part of the component design. Specify its shape, orientation and permitted gap in the condition in which the part will be inspected.
FIT
Inside & Outside Dimensions
Define the mating shaft or housing, critical diameters and whether measurements apply before or after installation.
FORM
Length, Wall & Edges
State the overall length, wall thickness and edge requirements. Identify contact faces and assembly surfaces that need particular attention.
02 / CUSTOMIZATION
The Right Specification Starts With the Mating Parts.
A bushing is more than a nominal diameter. Its material, formed geometry and finish must be considered together with the surrounding assembly.
| Drawing requirement | Information to provide |
|---|---|
| Material | Required metal grade and condition; tell us if a specific specification must be followed. |
| Dimensions & fit | Inside / outside diameter, length, wall thickness, tolerances and mating-part information. |
| Seam & edge condition | Seam geometry, opening or gap requirement, burr limits and edge treatment. |
| Surface finish | Coating or plating specification, appearance requirements and any dimensional allowance for finishing. |
| Inspection & packaging | Critical characteristics, sampling or inspection requirements, identification and protective packaging. |
03 / QUALITY MANAGEMENT
Confidence Supported by Documentation.
QUALITY MANAGEMENT SYSTEM
ISO 9001:2015
Zhejiang Shangshi Precision Hardware Manufacturing Co., Ltd.
The certificate covers the machining of mechanical components (stamped parts).
Send your drawing and quality requirements so the inspection points and required documentation can be defined for your project.
View certificate →Selected Third-Party Test Reports
CTI Material Testing
Test report for submitted retaining-ring / bushing samples. The excerpt records testing for lead, cadmium, mercury and hexavalent chromium.
View report excerpt →
Salt Spray Testing
A neutral salt spray report from our metal-component documentation. The tested sample is a retaining ring; bushing-specific test requirements are agreed for each project.
View report excerpt →Reports apply to the samples and test items identified in each document. Request the relevant documentation for your specified part.
04 / FROM DRAWING TO DELIVERY
A Practical Route to Your Custom Bushing.
01 / REVIEW
Share the Assembly Requirements
Send a 2D drawing, 3D model or sample with quantities and critical dimensions. Include the mating-part details where fit matters.
02 / CONFIRM
Agree the Part & Sample
Confirm the material, geometry, finish and inspection criteria. Review samples against the agreed requirements before proceeding.
03 / REPEAT
Maintain the Approved Specification
Use the approved drawing revision and agreed inspection, identification and packaging requirements for repeat production.
05 / BUYER QUESTIONS
Before You Send Your Enquiry.
Are these two-piece split bearing shells?
This range focuses on formed metal bushings with an open seam. If you need a two-piece construction, send the assembly drawing so the requirement can be reviewed separately.
Can dimensions and finishes be customized?
Yes. Provide the required dimensions, metal grade, finish and order quantity. Feasibility, tooling and inspection requirements are reviewed for the specific design.
Do you supply PTFE or POM-lined composite bearings?
No. This category covers metal bushings and sleeves, not PTFE/POM-lined composite bearings.
What is needed for a quotation?
A drawing or sample, material and finish requirements, expected quantity and any critical inspection or documentation requirements. Please also indicate your requested delivery schedule.
START YOUR PROJECT
Discuss Your Next Metal Bushing Project
Choose from 100+ in-stock bushing and retaining-ring models, request free samples, or send your drawing for custom manufacturing.
Request Samples or a Quote→SHANGERS | Zhejiang Shangshi Precision Hardware Manufacturing Co., Ltd. | www.zjssjm.com
We're well-known as one of the leading split bushing manufacturers and suppliers in China. With reliable product quality and honest service, we have won widespread trust and praise from our customers. Please rest assured to wholesale custom made split bushing from our factory.
split steel bushings, split bronze bushed journal bearing, split bushing
