Metal Sleeve Bushings for Plastic Holes
This split metal bushing is intended to be pressed into a hole in a plastic component. The application illustration shows the plastic surrounding the outside of the sleeve while leaving the metal bore accessible. SHANGERS can review enquiries for similar custom sleeves based on your part drawing or sample.
The Sleeve and Its Position
The loose component beside the plastic block shows the sleeve before installation. It has an open seam with a curved mating profile, rather than a seamless cylindrical wall. It is not a threaded insert or a flanged bushing.
In the illustrated arrangement, the sleeve sits flush with the top surface and the plastic sidewall remains intact. The block is an application concept, not a customer assembly. The installation depth for your own part should be specified separately.
Matching the Sleeve to the Hole
A nominal diameter alone does not define the fit. Sleeve dimensions, hole dimensions and the plastic material need to be considered together when installation requirements are part of the enquiry.
The opening visible in the illustration is not an installation tolerance. The required seam gap and finished bore must follow the agreed specification. No insertion-force, retention or service-life rating is implied by the image.
Information for a Custom Enquiry
- Sleeve diameter, length and wall thickness.
- Seam shape and any required edge relief.
- Specified metal grade and surface treatment, if known.
- Plastic hole dimensions where fit needs to be reviewed.
- Required installation position: flush, recessed or otherwise.
- Sample quantity and expected production quantity.
Start with the Part You Need
You do not need a complete assembly drawing to ask about a similar sleeve. A bushing drawing, physical sample or clear photographs with key dimensions can start the discussion. If the plastic-hole fit is important to the enquiry, a local hole detail and the plastic material can be supplied separately.
Discuss Your Sleeve with SHANGERS
Send the information you already have and identify which requirements are confirmed. This is a non-standard manufacturing enquiry, not a universal replacement part for every plastic housing.
Product views are AI-assisted visualisations based on a supplied photograph. The plastic housing scene is an application concept, not a verified customer installation.
Hot Tags: custom metal sleeve bushings for plastic holes, Chinacustom metal sleeve bushings for plastic holes manufacturers, suppliers, factory, split bush bearings, split bushing sleeve, Split Pin Bushing, Split Steel Bushing Sleeve, split steel bushings, spring steel split bushing







